Heat Resistance Powder Coating

Features: Color All RAL colors are available to meet customer's requirement Glossiness high-gloss, semi-gloss, low-gloss, matt Surface Smooth and special finish(texture, wrinkle, hammer, etc)for all kind of gloss Density 1.3-1.8g/cm3 Type Epoxy, polyester, epoxy-polyester Storage The products should be stored in ventilated, dry and clean room with the temperature below 30.Not to be close to fire and heat and kept out direct sunlight. Outdoor stacking is prohibited. On the condition mentioned above, the products can be stored stably for 12 months. Application Fume exhaust ductwork, barbecue rack, heat exchangers, lighting fixture, oven etc. Packing Inner packing: Double PE bags Outer packing: 50ctns(1000kg)/pallet Net weight:20kg/ctn Technical indexes of powders:Appearance (visual) Homogeneous colour without any agglomerate Fineness(180mesh sieve residue) <0.5% Gel time 30-180S(200°C±2°C) Curing condition 180°C/15min Fused flowability 20-70mm(150°C±2°C) Average coverage rate 10m2/kg Properties of coating film: StandardsPropertiesFilmappearance Bynaked eyesSmoothand uniformFilmthickness ISO236060-80μmGloss60° ISO28132-95°Impactresistance ASTM D2794GB/T1732-199350KgPencilhardness ASTM D3363GB/T6739-1996H-2HAdhesion(crosscut) ISO2409GB/T9286-19980grade(1mm6×6)Flexibility ASTMD5221/8Cuppingtest GB9753-19886mmBendtest ISO1519GB/T6742-19862Colordifference Noobvious color differenceSaltspray test ISO9227GB/T1771-1991>500Humidheat resistance ISO6270-1GB/T1740-1979>1000Heatresistance 110/24h(allcolors)Goodgloss retentionAberration ≤0.3-0.4 Notice: Aviod inbreathing dust when using the products though the powder coatings are nontoxic. The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible. This technical date is only for user to reference, in case of the problem can not be solved, please contact the technology department of our factory.