Epoxy Powder Coating

Features: Color All RAL colors are available to meet customer’s requirement Glossiness high-gloss, semi-gloss, low-gloss, matt Surface Smooth and special finishes(texture, wrinkle, hammer, etc)for all kind of gloss Density 1.2-1.7g/cm3 Type Epoxy Storage The products should be stored in ventilated, dry and clean room with the temperature below 30.Not to be close to fire and heat and kept out direct sunlight. Outdoor stacking is prohibited. On the condition mentioned above, the products can be stored stably for 12 months. Application Metal products, mechanical parts, pipes,pump body, household electric ware, furniture, building decorations, auto parts,etc Packing Inner packing: double PE bags Outer packing: 50ctns(1000kg)/pallet Net weight:20kg/ctn Technical indexes of powders: Appearance (visual) Homogeneous colour without any agglomerate Fineness(180mesh sieve residue) <0.5% Gel time 30-180S(200°C±2°C) Curing condition Smooth high/semi gloss:170°C/15min Smooth matt :190°C/12min Fused flowability(mm) 22-35mm(180°C) Average coverage rate 14m2/kg(50μm) Properties of coating film: StandardsHigh glossmattFilm appearance By naked eyesSmooth and uniformSmooth and uniformFilm thickness ISO236060-80μm60-80μmGloss 60° ISO281380-95°3-25°Impact resistance ASTM D2794GB/T1732-199350Kg50KgPencil hardness ASTM D3363GB/T6739-19962H2HAdhesion(cross cut) (1mm6×6) ISO2409GB/T9286-19980 grade0 gradeFlexibility ASTM D5221/81/8Cupping test ISO1520GB 9753-1988≥7mm≥2.5mmBend test ISO1519GB/T6742-1986≤5≤10Color difference No obvious color differenceNo obvious color differenceSalt spray test ISO9227GB/T1771-1991>500>500Humid heat resistance ISO6270-1GB/T1740-1979>500>500Buchholz indentation test ISO281595-10090 Notice: Aviod inbreathing dust when using the products though the powder coatings are nontoxic. The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible. This technical date is only for user to reference, in case of the problem can not be solved, please contact the technology department of our factory.