Clear Acrylic Powder Coating

Features: Color All RAL colors are available to meet customer’s requirement Glossiness high-gloss, semi-gloss, low-gloss, matt Surface Smooth and special finish(texture, wrinkle, hammer, etc)for all kind of gloss Density 1.2g/cm3 Type Acrylic resin Storage The products should be stored in ventilated, dry and clean room with the temperature below 30.Not to be close to fire and heat and kept out direct sunlight. Outdoor stacking is prohibited. On the condition mentioned above, the products can be stored stably for 12 months. Application Automotive aluminum-alloy, automotive shell, automotive wheel-hub, bicycle, motorbicycle, high class metal furniture Packing Inner packing: double PE bags Outer packing: 50ctns(1000kg)/pallet Net weight:20kg/ctn Technical indexes of powders: Appearance (visual) Homogeneous colour without any agglomerate Fineness(180mesh sieve residue) <0.5% Gel time 30-180S(200°C±2°C) Curing condition 160°C/20min 180°C/12min Fused flowability 22-35mm(180°C) Average coverage rate 13.8m2/kg(60μm) Properties of coating film: StandardsPropertiesFilm appearance By naked eyesSmooth and uniformFilm thickness ISO236060-80μmGloss 60° ISO28132-95°Impact resistance ASTM D2794GB/T1732-199350KgPencil hardness ASTM D3363GB/T6739-19962H-3HAdhesion(cross cut) ISO2409GB/T9286-19980 grade(1mm6×6)Buchholz indentation test ISO2815≥90Flexibility ASTM D5221/8Cupping test GB 9753-1988≥8mmBend test ISO1519GB/T6742-1986≤3Color difference No obvious color differenceSalt spray test ISO9227GB/T1771-1991>1000Humid heat resistance ISO6270-1GB/T1740-1979>1000weather resistance EN20105-A02≥4Light aging test ENISO105-B02≥7gradeKesternich testing ISO32310,2/SO2--passAcid resistance ASTMD3260passDrill-grinding test pass Notice: Aviod inbreathing dust when using the products though the powder coatings are nontoxic. The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible. This technical date is only for user to reference, in case of the problem can not be solved, please contact the technology department of our factory.